Updated Nov 16, 2026· 5 min read

Key takeaways

  • Uninstall the adapter in Device Manager and restart so Windows tries to reinstall it. Microsoft lists this as a standard step.
  • If nothing appears, you need the driver from another connection. Use a phone with USB tethering, a wired Ethernet connection or another PC to download the driver from the motherboard, laptop or card maker.
  • Match the driver to the exact model and Windows version. Many motherboard makers provide the wireless driver on the support page for that board.
  • If the problem started after an update, try rolling the driver back from the adapter’s properties.

When a Wi-Fi card is not detected, the usual fixes are to power down and reseat the card and its antenna leads, make sure the slot or M.2 connector is enabled in firmware, install the maker’s driver, and rule out a disabled adapter in Windows. If the card still does not appear in Device Manager or the BIOS, the card or its slot is likely faulty and belongs with the maker or a technician.

Symptom, cause and fix at a glance

What you see Likely cause What to do
No Wi-Fi icon or settings at all Adapter disabled, or driver missing Check Device Manager and Network connections; install driver
Yellow warning on the adapter Driver problem Reinstall or roll back the driver
Unknown device or nothing listed Card not seated, slot disabled, or hardware fault Power off and reseat; check firmware settings
Wi-Fi works but Bluetooth does not, or reverse Partial driver or the USB header for Bluetooth not connected Install combined driver; check the internal cable
Card detected but no networks found Antennas not attached Connect the antenna leads and reposition
Missing after a Windows update Driver replaced or removed Roll back or reinstall the maker’s driver

Step 1: confirm what Windows can see

  1. Right-click the Start button and open Device Manager.
  2. Expand Network adapters and look for an entry mentioning wireless, Wi-Fi or the chip maker such as Intel, Realtek, MediaTek or Qualcomm.
  3. Turn on View, then Show hidden devices, and look for greyed-out adapters or entries under Other devices.
  4. Open the Network connections list from the Control Panel. A disabled Wi-Fi adapter shows greyed out and can be enabled with a right-click.

If the adapter is listed but disabled, enabling it is the whole fix. If it is not listed anywhere, the problem is below the operating system level.

Step 2: run the basic Windows checks

Microsoft’s Wi-Fi help recommends turning off Airplane mode, running the network troubleshooter, and installing available Windows and driver updates. Laptops may also have a function-key combination or a physical switch that disables the radio, so look at the keyboard icons.

Step 3: reinstall the driver properly

  • Uninstall the adapter in Device Manager and restart so Windows tries to reinstall it. Microsoft lists this as a standard step.
  • If nothing appears, you need the driver from another connection. Use a phone with USB tethering, a wired Ethernet connection or another PC to download the driver from the motherboard, laptop or card maker.
  • Match the driver to the exact model and Windows version. Many motherboard makers provide the wireless driver on the support page for that board.
  • If the problem started after an update, try rolling the driver back from the adapter’s properties.

Step 4: check firmware settings

On a desktop, open the BIOS or UEFI setup. Look for a setting that enables onboard wireless or Bluetooth, or for the state of the M.2 or PCIe slot. The names differ between manufacturers, so consult the motherboard manual. A firmware reset to defaults can restore a disabled device, but any firmware change can affect stability and, in some cases, warranty, so only alter settings you understand and write down the original value first. Updating the BIOS may add support for newer cards, though it carries risk if power is interrupted, so follow the board maker’s instructions exactly.

Step 5: reseat the card (desktop or laptop)

Only do this if you are comfortable opening the PC. Shut down, unplug the power cable and discharge static by touching bare metal on the case before you start.

  1. Locate the card. On modern boards it is a small M.2 module (often E-key) under a screw, or a PCIe card in an expansion slot.
  2. Disconnect the two small antenna leads gently. They are fragile and push on without a latch.
  3. Remove the retaining screw, pull the module out, and look for dirt or damage on the gold contacts.
  4. Reinsert it fully at the correct angle, press it flat and refit the screw.
  5. Reattach the antenna leads firmly, with the leads going to the correct marked connectors.
  6. For a PCIe card, check the card sits fully in its slot and that any USB header cable for Bluetooth is plugged in.

Never open a power supply. On laptops, follow the maker’s service manual and check that opening the case does not void your warranty.

Step 6: consider compatibility

  • M.2 slots have different key types. A Wi-Fi module that is meant for an E-key slot will not work in a drive slot.
  • Newer cards such as Wi-Fi 7 models may need a recent operating system and driver. The maker lists the supported systems on its product page.
  • Some laptops use whitelists in firmware for wireless cards, so a third-party card may not be accepted. The laptop maker can confirm which cards are supported.

When to replace or seek service

Finding Next step
Card absent from firmware and Device Manager after reseating Try the card in another PC, or another card in your PC, to find which part has failed
Card works elsewhere, not in your board Contact the motherboard maker about the slot
Visible damage to contacts or antenna connectors Replace the part or use a USB adapter as a stopgap
Device under warranty Contact the maker before opening it

A USB Wi-Fi adapter or wired Ethernet is a quick way to get online while you sort the card out.

Common mistakes

  • Searching for the driver on a PC that has no internet and having no second connection available.
  • Forgetting the antennas, leading to a detected card that sees no networks.
  • Reseating parts with the PC still plugged in.
  • Assuming a faulty card when the adapter is only disabled in Windows.
  • Installing generic driver packs of unknown origin.

Frequently Asked Questions

Why does my Wi-Fi card not show in Device Manager?

The adapter is either disabled in firmware, not seated properly, or has failed. Show hidden devices first, then check the BIOS or UEFI settings and reseat the card with the power off.

Can a Windows update make the Wi-Fi card disappear?

It can replace the driver with a version that does not work with your card. Rolling back the driver or installing the maker’s version typically solves it.

Do I need antennas for a desktop Wi-Fi card?

Yes. Without them the card may be detected yet find few or no networks. Attach both leads and place the antennas in open space.

Will a BIOS reset help?

Sometimes, if the wireless or slot setting was changed. A reset reverts other settings too, so note your configuration, and read the board manual before changing anything.

Is a USB Wi-Fi adapter a reasonable replacement?

Yes, as a workaround or permanent fix. Performance varies by model, so pick one from a maker with current Windows drivers.

When should I contact the manufacturer?

If the card is missing after reseating and a clean driver install, or if opening the case would affect the warranty, contact the maker or a qualified technician.

N
Noah Parker
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

Why does my Wi-Fi card not show in Device Manager?
The adapter is either disabled in firmware, not seated properly, or has failed. Show hidden devices first, then check the BIOS or UEFI settings and reseat the card with the power off.
Can a Windows update make the Wi-Fi card disappear?
It can replace the driver with a version that does not work with your card. Rolling back the driver or installing the maker’s version typically solves it.
Do I need antennas for a desktop Wi-Fi card?
Yes. Without them the card may be detected yet find few or no networks. Attach both leads and place the antennas in open space.
Will a BIOS reset help?
Sometimes, if the wireless or slot setting was changed. A reset reverts other settings too, so note your configuration, and read the board manual before changing anything.
Is a USB Wi-Fi adapter a reasonable replacement?
Yes, as a workaround or permanent fix. Performance varies by model, so pick one from a maker with current Windows drivers.
When should I contact the manufacturer?
If the card is missing after reseating and a clean driver install, or if opening the case would affect the warranty, contact the maker or a qualified technician.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.