Key takeaways
- Air modes and 120dB dynamic range listed
- XLR preamp plus Hi-Z instrument input
- Works with PC, Mac and iPad
The best audio interfaces under $200 start with the Focusrite Scarlett Solo 4th Gen: one XLR mic preamp, a Hi-Z instrument input, 24-bit/192kHz conversion and USB-C. Choose the Yamaha UR22MK3 for loopback and two combo inputs, or the Behringer UMC202HD if you want a 2×2 interface at the lowest outlay.
The six interfaces below were compared from listing specifications, not used by us, so each claim is the seller’s. For a streamer or home recorder, an interface replaces a USB mic with an XLR microphone, a clean preamp and monitoring, so the picks are judged on inputs, conversion and how easily they fit a desk.
Quick Comparison
| Model | Key specs per listing | Best for |
|---|---|---|
| Focusrite Scarlett Solo 4th Gen | USB-C, 1 XLR preamp, 1 Hi-Z, 24-bit/192kHz, 120dB dynamic range | One mic or one instrument |
| Focusrite Scarlett Solo 3rd Gen | USB-C, 1 XLR preamp, 1 Hi-Z, 24-bit/192kHz, 56dB gain | Lower-outlay Scarlett |
| MOTU M2 | USB-C audio interface | Two-channel recording |
| Universal Audio Volt 2 | 2×2 USB-C, 610 tube emulation, MIDI | Vocal warmth for podcasters |
| Behringer UMC202HD | 2×2, 24-bit/192kHz, Midas preamps | Lowest outlay, two mics |
| Yamaha UR22MK3 | 2-in/2-out USB-C, 2 combo inputs, loopback, Steinberg software | Streaming with loopback |
Focusrite Scarlett Solo 4th Gen: Best Overall Under $200
Listing specs: USB-C audio interface, 1 XLR mic preamp, 1 Hi-Z instrument input, 24-bit/192kHz, 120dB dynamic range, Air modes, PC, Mac and iPad compatible.
The Solo 4th Gen is the safest choice for a single mic. The listing gives you a mic preamp, a Hi-Z input for guitar or bass, 24-bit/192kHz conversion and Air modes, which add a brighter tone to a voice. The 120dB dynamic range figure is listed, and it is higher than the 3rd Gen version. The main limit is channel count: with one mic input and one instrument input, it suits a solo streamer or singer, but not a two-person podcast. The listing does not say whether the headphone output is a full-size jack, so check the maker page. For one-microphone work, this is the pick. It is also a sensible long-term buy, because a single XLR input with a clean preamp will serve you until you actually need a second microphone, and a USB-C cable is all you need to connect it. If you later grow into a two-guest podcast, you can move to a 2×2 model and keep your microphone.
Pros
- Air modes and 120dB dynamic range listed
- XLR preamp plus Hi-Z instrument input
- Works with PC, Mac and iPad
Cons
- Only one mic input
- Headphone output details not listed
Focusrite Scarlett Solo 3rd Gen: Best Lower-Outlay Scarlett
Listing specs: Scarlett Solo 3rd Gen USB-C audio interface, 1 XLR mic preamp, 1 Hi-Z instrument input, 24-bit/192kHz, 56dB gain range, Air mode, macOS, Windows and iPadOS compatible.
The 3rd Gen has the same layout as the 4th Gen, with one XLR input, one Hi-Z input and Air mode, but it lists 56dB of gain and does not list the newer dynamic range figure. That gain range works well with most dynamic mics, but quieter microphones such as some ribbons may need more. It is the lower-outlay version of the pair and a sensible choice if you only need a clean preamp for a voice. It sits one generation behind, so confirm the software and driver support for your operating system on the maker page.
Pros
- Same one-mic layout as the 4th Gen
- 56dB gain range listed
- Air mode
Cons
- Older generation
- Less gain for quiet mics
MOTU M2: Best for Two-Channel Recording
Listing specs: MOTU M2 USB-C audio interface (listing gives the model name and USB-C only).
The listing is brief, giving only the model name and the USB-C connection, so everything else should be checked on the maker page. The M2 is a two-channel interface, which suits two mics or a mic and an instrument. Beyond that, the listing states the USB-C connection and nothing else. That makes it a good fit for someone who already knows the model, and a risk for someone who wants details at a glance. At the upper end of the range, it competes with the Volt 2 and Yamaha for the two-input slot.
Pros
- Two-channel design for two sources
- USB-C connection
- Two-input design from a recording-focused brand
Cons
- Listing gives almost no specs
- Upper end of the price range
Universal Audio Volt 2: Best for Vocal Warmth
Listing specs: Universal Audio Volt 2 USB audio interface, 2×2 USB-C interface with 610 tube emulation and MIDI for musicians, podcasters and streamers.
The Volt 2 adds a 610 tube emulation mode, which colours the sound in the way a vintage preamp might, and it adds a MIDI connection for keyboards and controllers. That makes it a good fit for singers, podcasters and musicians who want a warmer tone without extra gear. The 2×2 layout means two inputs and two outputs, so two people can record at once. The listing does not state the sample rate or bit depth, so check the maker page if you need those numbers. It is the choice when tone matters. Keep in mind that tube emulation changes the sound on the way in, so recordings made with it engaged cannot be fully undone later, which is worth remembering if you plan to process your voice in software afterwards.
Pros
- 2×2 design with 610 tube emulation
- MIDI connection
- Aimed at musicians, podcasters and streamers
Cons
- Bit depth and sample rate not in the listing
- Tube emulation is a flavour, not a necessity
Behringer UMC202HD: Best Lowest-Outlay Two-Channel Interface
Listing specs: Behringer UMC202HD Audiophile 2×2, 24-bit/192kHz USB audio interface with Midas mic preamplifiers, for recording microphones and instruments.
Behringer gives you two inputs and outputs, 24-bit/192kHz conversion and Midas-designed preamps, at the lowest outlay in the group. That is enough for a two-person podcast or a streamer with a mic and an instrument. The listing mentions the connection as USB without giving the connector type, so check whether it is USB-C or an older connector. The case material is not stated in the listing. It lacks loopback in the listing, so streaming setups will need software routing to capture game sound. For a pure recording desk with a vocal mic and a guitar, this limitation does not matter, and the lower outlay leaves more of your budget for a good microphone and a pop filter.
Pros
- 2×2 with Midas preamps
- 24-bit/192kHz
- Lowest outlay of the two-channel models
Cons
- Loopback not listed
- USB connector type not clear in the listing
Yamaha UR22MK3: Best for Streaming With Loopback
Listing specs: Yamaha 2-in/2-out USB-C audio interface, 24-bit/192kHz, 2 combo inputs, direct monitoring, loopback function, Steinberg software suite (UR22MK3).
Loopback is the feature that makes this interface especially suited to streaming: it lets you send game or music audio into the stream together with your mic. The listing also gives two combo inputs, direct monitoring, 24-bit/192kHz and a Steinberg software suite for recording. Combo inputs accept both XLR microphones and quarter-inch instruments, which is flexible. The listing does not give the gain range or the headphone output details, so check the maker page. For a streamer who wants one box to handle a mic, an instrument and game audio, it is the strongest pick here. A practical tip is to keep the game sound out of your headphones mix at a lower level than your voice, since a loud game mix can bleed into a sensitive microphone if you use open-back headphones or speakers.
Pros
- Loopback function listed
- Two combo inputs
- Steinberg software suite
Cons
- Gain range not stated
- Headphone output details not listed
How to Choose Under $200
Count inputs and outputs you need
One mic means a Solo-style interface is enough, and it is the better use of your budget if you only record yourself. Two mics, or a mic and an instrument, call for a 2×2 model such as the Volt 2, UMC202HD, M2 or Yamaha. Outputs matter if you use powered speakers and headphones at the same time. As a worked example, a two-person podcast with one guest microphone needs two XLR inputs and a headphone feed for each person, which is why the single-input Solo models do not fit that case. If you add a keyboard that sends MIDI, the Volt 2 lists a MIDI connection, which is one more reason to consider it.
Audio interfaces for home office and calls
For calls and recordings from a desk, a simple interface with an XLR mic gives a better voice than a built-in laptop mic. Direct monitoring, listed on the Yamaha, lets you hear yourself without delay. A USB-C connection, as on most of these, is easy to plug in. Set the gain so your loudest words peak around the middle of the meter, which leaves room for surprises, and keep the microphone a hand’s width from your mouth for a stable level.
Audio interfaces for small spaces
A compact interface fits beside a keyboard or monitor. The Solo models are the smallest among these listings, with one mic input and a simple layout. Place the interface where the knobs are easy to reach and the cable does not strain. If the desk is crowded, a small interface can sit under a monitor riser, but keep it away from power bricks, which can add hum to the signal in some setups.
Audio interfaces for gaming and streaming
A streamer needs loopback or software routing to blend game audio and mic. The Yamaha lists loopback, so it suits streaming best. Otherwise, use your streaming software to capture the game and a mic separately. Latency matters for monitoring, so look for direct monitoring. Direct monitoring sends your mic to your headphones inside the interface, so you hear yourself with no delay while the computer works on the recorded signal.
Frequently Asked Questions
Do I need an audio interface for streaming?
Not if you use a USB mic. An interface lets you use an XLR microphone, which often sounds better and can be upgraded later.
Can an audio interface under $200 power a condenser mic?
Condenser mics need 48V phantom power. Check the maker page for each model, since the listings here do not all state it.
What does 24-bit/192kHz mean?
It describes how the interface samples sound. For voice and music recording, 24-bit/48kHz is already high quality, so 192kHz is more of a headroom spec. Higher sample rates also create larger files and put more load on the computer, so most streamers and podcasters record at 48kHz and never notice a difference in practice.
Is loopback useful?
Yes for streaming, because it routes game or music audio into the stream with your mic. The Yamaha lists loopback.
Which interface is best for a guitar?
Any with a Hi-Z or combo input. The Scarlett Solo models list a Hi-Z instrument input, and the Yamaha lists combo inputs. Plug the guitar straight into that input rather than through a pedal chain if you want the cleanest signal to record.
Last updated: November 2026
FAQ
Do I need an audio interface for streaming?
Can an audio interface under $200 power a condenser mic?
What does 24-bit/192kHz mean?
Is loopback useful?
Which interface is best for a guitar?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.