Cyber Monday ITX case deals: Six cases to track in 2026

Cyber Monday ITX case deals are not live yet: Cyber Monday in the United States falls on November 30, 2026. This October 28 guide is a pre-event US price watchlist, not a list of confirmed Cyber Monday discounts. It compares six identifiable Mini-ITX cases using observed seller prices, visible stock indicators, and manufacturer fit limits. Four configurations have a clear manufacturer “In Stock” label or a US retailer “Add to cart” listing; the NR200 and NR200P V2 have model/color availability selectors that still require checkout confirmation. If you are buying today, verify the exact color and model number at checkout. If you can wait, record the same SKU’s current price and recheck it on November 30. [1–13]

Quick verdict: the cases to watch

Best higher-end modern GPU candidate: Cooler Master NR200P V3 (NR200PV3-KWNN-S00). It is a current US maker-listed, in-stock case at $179.99, with a PCIe 5.0 riser, 240/280mm top radiator support and published GPU maximums of 361.5mm long and 78.5mm thick. This does not mean every GPU under those maximum dimensions will fit once connector routing is included. [2]

Best lower-price flexible air-cooling watch: Cooler Master MasterBox NR200. Cooler Master displayed $99.99 (crossed-out $119.99), plus an Add to Cart control, but its color selector said “Select Styles for Availability.” The original NR200 supports a CPU tower cooler up to 155mm with the conventional GPU layout, unlike the low-profile-cooler-focused NR200P V2/V3. Confirm the selected variant before calling it available. [3]

Best compact 240mm-AIO candidate: LIAN LI A4-H2O (A4-H2OA5 silver). Newegg displayed $154.99 with Add to cart, and the maker specifies an 11L Mini-ITX layout with room for a top 240mm radiator only within 55mm combined radiator-and-fan thickness. GamersNexus independently highlighted its compact liquid-cooling purpose and cable-management compromises. [5–7]

Best storage-first choice: Fractal Design Node 304 Black (FD-CA-NODE-304-BL). Newegg showed $109.99 plus $9.99 shipping and Add to cart. This 19.5L Mini-ITX case supports six drive positions and ATX power supplies, but a 310mm graphics card requires removing two drive brackets and its GPU-thickness limit is only 45mm. This is not a blanket recommendation for thick modern cards. [10–11]

Best compact vertical-aesthetic option, with thermal warnings: Fractal Design Mood Black (FD-C-MOD1N-02). Newegg showed $164.99, sold and shipped by Newegg, with Add to cart. Its fabric enclosure and 20L pillar design are visually unusual, but independent GamersNexus testing found meaningful airflow and thermal limitations. Choose it for appearance only after assessing your component heat load. [8–9]

Best V2 alternative if the price is right: Cooler Master NR200P V2 Black (NR200PV2-KCNN-S00). Cooler Master listed $134.99 and Add to Cart, with selectable styles for availability. It uses a PCIe 4.0 riser and tops out at a 280mm radiator. Its GPU clearance depends on whether the card extends beyond the front bracket; the V2 should not be mistaken for the V3 or original NR200. [4]

US price and stock snapshot — October 28, 2026

These are observed October 28 pre-sale page prices, not Cyber Monday deals. The label “Add to cart” is a storefront signal rather than a completed purchase or shipping promise. Tax, seller identity, ZIP-code shipping, membership and selected case color can change checkout eligibility. No Cyber Monday discount percentage can be verified before the event. [1–11]

References [1–15] are resolved by exact URL and checked date in the accompanying evidence log.

Not a buy-now pick: The Fractal Terra Graphite (FD-C-TER1N-01) showed $199.99 but a Newegg backorder notice, not immediate stock. It is worth a separate restock alert if the 10.4L design suits your build. Its adjustable internal spine changes CPU-cooler and GPU-thickness room; the advertised 322mm card length alone does not prove fit. [12–13]

Which mini-ITX case is right for your build?

Cooler Master NR200P V3: the current big-GPU ITX watch

For a performance-oriented build, the V3’s manufacturer-listed 361.5mm maximum GPU length (including power connector), 160mm GPU height and 78.5mm thickness are the most permissive published GPU envelope in this shortlist. It includes a PCIe 5.0 x16 riser and GPU holder, supports SFX/SFX-L power supplies and a top 240/280mm radiator. However, it allows only 70mm of CPU air-cooler height, so do not buy a tall tower cooler expecting NR200-class clearance. Its 18.62L quoted volume includes protrusions. [2]

Who should buy or watch: builders who have selected an oversized, high-power graphics card and a compatible top AIO. Who should skip: anyone intending to reuse a 120–155mm tower cooler or a 360mm radiator. Before purchase, compare the GPU maker’s exact L×H×W—including shroud and connector—with all three case limits, then inspect the V3 installation manual for cable bend and radiator interactions.

Cooler Master NR200: the practical air-cooling baseline

The original steel-panel NR200 takes Mini-ITX/Mini-DTX boards and supports SFX/SFX-L PSUs, side-mounted 240/280mm radiators and a 155mm tower air cooler in its conventional card orientation. Cooler Master’s GPU limits are 330mm long, 156mm high and 60mm thick. These dimensions make the original NR200 a different build proposition from the V2 and V3, which use vertical GPU layouts and much lower CPU-cooler clearances. A low seller page price should never override a failed compatibility check. [3]

Who should buy or watch: air-cooling-first Mini-ITX builders with GPUs that meet the original NR200 fit envelope. Who should skip: people expecting the V3’s PCIe 5.0 riser or its larger vertical-GPU allowances. The manufacturer page price shows a pre-Cyber-Monday reduction; use $99.99 as an October observation, not as proof that November will be cheaper.

Cooler Master NR200P V2: 280mm AIO with careful card geometry

The NR200P V2 includes a PCIe 4.0 riser and a GPU holder. It takes SFX/SFX-L PSUs, top 240/280mm radiators and CPU air coolers up to 67mm. Cooler Master’s formal GPU clearance changes by card geometry: when a card extends beyond the front bracket, maximum quoted length is 357mm with a 73mm thickness limit; when it does not, length is 334mm with an 80mm thickness limit. Those are alternative envelopes, not dimensions a builder can freely mix. [4]

Who should buy or watch: buyers with a verified top-mounted 240/280mm AIO who do not need V3’s PCIe 5.0 riser. Who should skip: builders needing a tall CPU tower cooler or who cannot confirm where their GPU falls relative to the front bracket. At $134.99 on the manufacturer page, the V2 is a useful pre-event comparison, not a verified November bargain.

LIAN LI A4-H2O: compact liquid-cooling priority

LIAN LI calls the A4-H2O an 11L case with a 326×140×244mm exterior, SFX/SFX-L PSU support, 322mm GPU length ceiling, three expansion slots and up to 55mm CPU air-cooler height. The 240mm top radiator limit is 55mm total for radiator plus fans; a typical advertised “240mm AIO” size does not by itself verify fit. Its PCIe 5.0 riser is specified for the A4-H2OA5/A4-H2OX5 variants in the current manufacturer documentation, so match the exact suffix when ordering. [5]

GamersNexus’ published independent build review describes a functional approach to compact liquid cooling but notes cable-management difficulty and the need to check pump/tube clearances rather than relying on the radiator’s nominal width. Those are laboratory observations for the reviewed configuration, not first-hand tests by Geek Gaming Tricks. [7]

Who should buy or watch: experienced builders prioritizing an 11L 240mm-AIO build. Who should skip: beginners wanting generous internal room, a large tower CPU cooler or storage beyond the single stated 2.5-inch drive position. Before buying, obtain the AIO manufacturer’s real radiator+fan stack thickness, pump-block height and tube direction.

Fractal Design Mood: attractive but not a thermal-first pick

The Mood is a 20L pillar case with a fabric-covered sliding shell, an included 180mm top fan, a PCIe 4.0 riser, 325mm GPU length allowance, up to 114mm CPU air-cooler height and support for a 280mm radiator. Newegg listed the black FD-C-MOD1N-02 for $164.99 with Add to cart. Fractal’s published dimensions also specify 60mm GPU thickness without the magnetic dust filter (58mm with it), so check board thickness rather than only length. [8, 14]

There is a material downside: GamersNexus found the enclosure’s fabric and internal airflow routing restrictive in controlled thermal testing. Its measured temperatures should not be projected onto a different CPU/GPU/fan curve, but the result is relevant enough that this is a design-first specialty choice, not our best-overall thermal recommendation. [9]

Who should buy or watch: buyers prioritizing a visually subtle vertical case for a reasonably controlled heat-load system. Who should skip: those maximizing sustained CPU/GPU power, airflow or low noise with minimal tuning.

Fractal Node 304: a storage-friendly alternative, not a thick-GPU case

The Node 304 is a 19.5L Mini-ITX/Mini-DTX enclosure with six convertible storage mounts, a 165mm CPU-cooler limit and support for ATX PSUs. This is notably different from the SFX/SFX-L emphasis of the other six cases. The official product page specifies a maximum GPU length of 310mm and 45mm thickness; the manufacturer sheet adds that two drive brackets must be removed for long graphics cards, while longer ATX PSUs can conflict with card installation. [10]

For a gaming-plus-storage or compact media server, the Node 304 offers a sensible October reference at $109.99, but the Newegg listing separately quoted $9.99 shipping. Who should buy or watch: users who need several drives and modest-width graphics hardware. Who should skip: builders assuming a three-slot GPU can fit simply because its length is less than 310mm. Measure the card’s actual thickness in millimeters and reconcile the drive layout before ordering. [10–11]

The three compatibility checks that matter more than a discount

Check GPU length, height, thickness and cable routing together

The case’s maximum GPU length is not a guarantee for a board with a large power plug or curved cable exit. Write down the exact GPU manufacturer part number; find its published length, height and thickness, then compare each value with the case maker’s layout-specific limits. For a riser/sandwich case, also inspect the connector’s direction and clearance to the panel. Do not equate 3-slot, 3.5-slot and a millimeter thickness measurement without looking at the card drawings. The V2’s two GPU envelopes are a good example of why one “maximum length” number can mislead. [2–5]

Match cooling type and radiator stack, not just diameter

A “280mm radiator supported” claim refers to a mounting configuration, not every 280mm AIO: radiator thickness, fan thickness, hose fittings and pump-block clearance still matter. The A4-H2O is especially strict at 55mm combined radiator-and-fan thickness. The NR200P V3 and V2 support top radiators up to 280mm; the original NR200 uses side mounts. None of these manufacturer specs authorizes a 360mm AIO in the shortlisted layouts. Pairing the wrong cooler with a discounted case can cost more than the discount saves. [2–5]

Verify the PSU and storage layout before checkout

Several modern sandwich-layout models specify SFX/SFX-L power supplies, while the Node 304 accepts an ATX supply subject to length/connector restrictions. The Node 304’s six drive positions compete with long-GPU room; other cases prioritize compact GPU/radiator space and offer fewer storage mounts. Count the required drives, locate each bracket in the official manual and check PSU body length plus cable exit room. Never treat case volume in liters as a direct measure of how easy the build will be. [2–6, 10]

How to verify a genuine Cyber Monday ITX case offer

1. Save an exact SKU and page URL today. Record, for example, NR200PV3-KWNN-S00 rather than just “NR200P,” because the original NR200, V2 and V3 have materially different risers and cooling configurations.

2. Record the baseline fairly. In a note or sheet, enter October 28, 2026; the US seller; exact SKU/color; observed listed item price; any separate shipping; and the stock label. Mark these as October reference prices, not historic lows or confirmed sale prices.

3. Set your own maximum payable total. A sensible threshold must include shipping and taxes and should reflect how well this case fits your specific components. Do not rely on an unverified “40% off” comparison to a list price.

4. Revisit the same merchant on November 27 and November 30. Black Friday may precede the Monday event, and a retailer can start or end its event on its own schedule. On each date, check identical model/color, seller identity, availability, discount eligibility and checkout total. [1]

5. Reject unverified deals. If checkout changes the price, forces an unsupported marketplace seller, indicates backorder or the case fails your fit worksheet, choose the next compatible model or wait. A site banner that says “Cyber Monday” is not a verified SKU-specific deal.

Example decision: If the NR200P V3 still costs $179.99 on November 30 at Cooler Master, that is not a price drop against the $179.99 October baseline. If a verified seller posts a lower checkout price for the exact same SKU, only then can you calculate the real same-SKU change. Do not compare a discounted NR200 to the V3 and call it a V3 discount. [2–3]

Questions shoppers ask

Are there confirmed Cyber Monday ITX case deals right now?

No confirmed November 30, 2026 Cyber Monday offers were established by this October 28 research. This is a reference-price watchlist, with individual stock labels and seller prices observed ahead of the sale. The live-deal version needs a fresh seller and checkout verification during the event. [1]

Is the NR200P V3 just the NR200P V2 with a new name?

No. Cooler Master lists a PCIe 5.0 riser and 361.5mm maximum GPU length for the V3, versus a PCIe 4.0 riser and geometry-dependent GPU allowances in the V2. The original NR200 also has a different conventional layout and permits much taller CPU air coolers. Choose by exact model code and manual, not family name. [2–4]

Which case should I use for a 360mm liquid cooler?

Not one of the six configurations in this watchlist on the basis of the cited manufacturer radiator specifications. The supported radiator locations top out at 240 or 280mm where liquid-cooling support is listed. If a 360mm AIO is non-negotiable, shop a different, explicitly compatible chassis and confirm the full radiator stack. [2–5, 8]

Does “Add to cart” mean a case is definitely in stock?

No. It is a visible retail-page buying control, not proof of completed checkout or shipment to a specific US ZIP code. For pages that say “Select Styles for Availability,” select the exact case variant and verify at checkout. Backordered products such as the observed Terra Graphite listing should not be presented as immediate in-stock picks. [2–4, 6, 8, 11–12]

Can I use an ATX power supply in these ITX cases?

Not universally. The Fractal Node 304 officially supports ATX power supplies under its stated length and GPU-clearance conditions. Many other compact cases in this shortlist specify SFX or SFX-L instead. Never force a physically different PSU into a case or assume that PSU length leaves enough room for modular cables. [2–5, 10]

Final thoughts

Start by deciding your build layout, then set a price alert. For a large vertical GPU and a compatible 280mm cooler, shortlist the NR200P V3; for a conventional air-cooled budget build, verify original NR200 stock; for a compact liquid-cooled build, check the A4-H2O’s strict 55mm radiator-and-fan stack. Choose the Node 304 for drive-heavy, slim-GPU builds, or the Mood only with its independent airflow warning in mind. Save the exact SKU and today’s observed US price; on November 30, buy only if the same SKU is truly available, the final total meets your own threshold, and the hardware fits. [1–14]